To check if the battery has a correct capacity

EZ Battery Reconditioning Method

How to Repair  All Batteries at Home

Get Instant Access

1. Do a battery refresh : USER, OPTIONS.., Battery Refresh

2. Disconnect the BC190 Battery Charger/Power Adapter

3. Start a TrendPlot: RECORDER

4. When the battery is discharged the ScopeMeter will shut down. Now connect the BC190, turn the power on and check the length of the TrendPlot trace. For a new battery pack this should be about 4 hours. Depending on the number of applied charge cycles the battery capacity will decrease. If the TrendPlot trace has a length of 3 hours or less you may consider to replace the battery pack.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment