General Maintenance

Title Page

3-1. Introduction 3-3

3-2. Warranty Repairs and Shipping Information 3-3

3-3. General Maintenance Information 3-3

3-4. Required Equipment 3-3

3-5. Power Requirements 3-3

3-6. Static Safe Handling 3-3

3-8. Fuse Test and Replacement 3-4

3-10. Current Input Fuses 3-4

3-11. Testing Current Input Fuses 3-4

3-12. Replacing the 500 mA and 440 mA Input Fuses (F1 and F5) 3-5

3-13. Replacing the 10 A Input Jack Fuse (F2) 3-6

3-14. Disassembly Procedures 3-7

3-15. Remove the Meter Case 3-7

3-16. Remove Handle and Mounting Brackets 3-7

3-17. Remove the Front Panel Assembly 3-8

3-18. Remove the Display PCA 3-8

3-19. Remove the IEEE-488 Option 3-9

3-20. Remove the Main PCA 3-9

3-21. Remove the Analog Measurement Processor Shields 3-9

3-22. Remove the Rms PCA 3-10

3-23. Remove the Battery Option 3-10

3-24. Disconnect Miscellaneous Chassis Components 3-10

3-25. Assembly Procedures 3-10

3-26. Install Miscellaneous Chassis Components 3-10

3-27. Install the Battery Option 3-11

3-28. Install the Rms PCA 3-11

3-29. Install the Analog Measurement Processor Shields 3-11

3-30. Install the Main PCA 3-11

3-31. Install the IEEE-488 Option 3-12

3-32. Assemble the Front Panel Assembly 3-12

3-33. Install the Front Panel Assembly 3-15

3-34. Install the Handle and Mounting Brackets 3-15

3-35. Install the Meter Case 3-15

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment