Common Mode Voltage
1000 V dc or rms ac maximum from any input to earth
Net, 2.4 kg without battery; 3.2 kg with battery; Shipping, 4.0 kg without battery, 4.8 with battery.
90 to 264 V ac (no switching required), 50 and 60 Hz. 15 VA maximum
Compliant with the following standards:
ANSI/ISA S82.01-1994 CAN/CSA-C22.2 No. 1010. 1-92
EN61010.1:1993 to 1000 V Overvoltage Cat I, 600 V Overvoltage Cat II UL3111-1. See the following for an explanation of CATI and CATII categories.
OVERVOLTAGE (Installation) CATAGORY I, Pollution Degree 2 per IEC1010-1 refers to the level of Impulse Withstand Voltage protection provided. Equipment of OVERVOLTAGE CATEGORY I is equipment for connection to circuits in which measures are taken to limit the transient over voltages to an appropriate low level. Examples include protect electronic circuits.
OVERVOLTAGE (Installation) CATAGORY II, Pollution Degree 2 per IEC1010-1 refers to the level of Impulse Withstand Voltage protection provided. Equipment of OVERVOLTAGE CATEGORY II is energy-consuming equipment to be supplied from the fixed installation. Examples include household, office, and laboratory appliances.
Meets FCC Part 15 Subpart J. EN61326-1 (1998) RS-232-C
300,600,1200, 2400, 4800 and 9600 Odd, even or no parity One stop bit
Was this article helpful?
You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.