Flash Block

The FinePix S5000 incorporates a 1 2.7 inch Fourth Generation Super CCD HR sensor with 3.1 million effective pixels and a new signal processing LSI (UCS2, IC206). The signal processing LSI (UCS2, IC206) is equivalent to the image signal processing IC (UCS, IC204, CSP) incorporated in the previous FinePix F601, however the new IC permits a dramatic reduction in the interval between photography and playback. It offers a newly designed super long 10X optical zoom 37-370mm, f2.8-f8(W) f3.2-f9(T)...

Table Of Contents

Product 1-2.Names of External 2-1. Internal 2-2. Removing the R CABINET ASSY 10 2-3. Removing the LCD 2-4. Removing the EVF UNIT 12 2-5. Removing the MAIN PWB ASSY 12 2-6. Removing the BATTERY HOLDER ASSY 13 2-7. Removing the DCST PWB Assy 14 2-8. Removing the Lens 2-9. Removing the STROBE CONST 15 2-10. Removing the AF FRAME Assy 15 16 3-2. Basic Block Names and Functions 16 3-3. Functions of Primary 3-3-1. Technical 3-3-2. Functions of Individual Blocks 17 3-5. Overall connection 3-6....

Fi rmWare 158

Ccd Device Fuji S5000

Vendor Name FUJIFILM Manufacturer FUJIFILM ProductName Fi nePi x Device Type CAMERA SerialNo y-558AAA Frame Work 1.00 Y-5 58AAAAA030719CaPX0000000014 1.00 OK 2 MG 1 6G.B7 22.79seo nGST P Operating gt The Firmware Display Screen Fig.4 appears. Firmware Confirmation Screen Operation Program Data Mode Setting Help FinePix S5000_w adjustment item select screen Execute the adjustment on sequentially. AF-assist Light Adjustment CCD Data input Camera Adjustment AF Adjustment Battery Voltage Adjustment...

Finepix S5000 Wffw.exe

Running End setting returns the camera to the Product mode from the Jig mode . Always run End setting if the PC adjustment software has been used to operate the camera. End setting is not run the camera will be recognized as Mass Storage when connected to the PC, and will be unable to communicate with the PC. Always check that the camera is recognized as Mass Storage when all adjustment is complete. The FinePix S5000 is able to batch-read data, however it is unable to batch-write data file...

Info

Press the Enter key to return to the Adjustment Item selection Screen. OK 3NG 18 14.29 463.49sec NGSTOP F Operating gt The Flash Adjustment Complete Screen Fig.30 appears. gt The system returns to the Adjustment Items Select Screen Fig.5 . Flash adjustment is complete. 1. Refer to the Setup Manual supplied with the jig for details of setting up the VIDEO adjustment jig with the PC. 2. Restart the camera before adjustment. Run the adjustment in accordance with the instructions on the screen. 1....

Power Cable

Place the camera lens upwards as the lens will operate, care is required . When preparations are complete, select F1 from the Adjustment Items Select Screen Fig.5 . press the F1 key on the keyboard Operation Program Data Mode getting Help Check that the Power cable jig and the camera are connected. If not, return to the Jig Mode Setup screen, and connect the Battery jig and the camera. when preparations are complete, press the Enter key. gt lens is extended when the Enter key is pressed. 0K...

Focas

Do not overwrite the user program FX_S5000_W.ff under any circumstances. The software will not run if the user program is overwritten. 4-9. Starting the Adjustment Software Double-click on FFW.EXE in the folder copied to the C drive to display the adjustment software start-up screen Fig.1 . Run the adjustment in accordance with the instructions on the screen.

How To Repair A Ccd Sensor On A Finepix S5000

Maintenance Manual For Fuji S5000

On the FinePix S5000, pressing the shutter button down half way locks the focus and exposure settings Af and AE lock . If you want to focus on a subject that is not centered in the frame or change the picture composition after the exposure is set, you can obtain good results by changing the composition after the aF and AE settings are locked. If the camera is not used in any way for 30 seconds, this function switches features such as the monitor off Sleep mode to prevent battery depletion and...

Usb Id

0K 3 NG 13 13.64 52.84sec JNGSTOP F Operating Operation Program Data Mode getting Help Log data reset and product mode setting K 3 NG 19 13.64 65.98sec GST P F Operating gt The Log data reset and Product Mode Setting Screen Fig.42 is appears. lt Step 6 gt Press the Enter key while in the Product Mode Setting Screen Fig.42 . Operation Program Data Mode Setting Help 1 Remove USB jig from the camera. gt the adjustment software returns to the Jig mode setup screen after press the Enter key. gt...

30220280

Q gt Defect data making procedure chart Fig. 10-2 lt Fig. Q gt Defect data making procedure chart Fig. 10-2 Open in 3022 folders, search for 30220280.dat Fig.10-2- 3 , and copy it onto the floppy disk. 1. Do not create a folder on the floppy disk when copying the data. Select F4 from the Adjustment Items Select Screen Fig.5 . press F4 on the PC keyboard gt The CCD Data Input Start Screen Fig.11 appears. lt Step 7 gt Make the following preparations in accordance with the instructions on...

A

lt Fig.B gt Setup for AF Adjustment 3 Setup for Flash Adjustment Fig.C Strobe adjustment is readily influenced by external light. The periphery of the gray chart should therefore be as dark as possible to minimize this influence. Ensure that the gray chart is at a distance of 1000mm from the camera reference face 1 . Use a Superior Oxford Gray No.22 chart, or a chart with reflectivity of 18 0.7 . 4 Preparation for AF-Assist Light adjustment 1. Output the image to TV with a camera that works...