112 Cathoderay Tube Warranty

1-13. The cathode-ray tube supplied with the Model 140A is guaranteed against electrical failure for one year from the date of sale by the Hewlett-Packard Company. The cathode-ray tube warranty is illustrated in Figure 1-2. A warranty sheet for your use is included in the appendix of this manual.

CRT WARRANTY CLAIM

FROM: DATE:

COMPANY: _

ADDRESS: _

The cathode ray tube supplied in your Hewlett-Packard Oscilloscope and replacement cathode ray tubes purchased from fy , are guaranteed against electrical failure for one year from the date of sale by the Hewlett-Packard Company. Broken tubes or tubes with.burned phosphor are not included in this guarantee.

Your local Hewlett-Packard representative maintains a stock of replacement tubes and will be glad to process your warranty claim for you. Please consult him.

Whenever a tube is returned for a warranty claim, the reverse side of this sheet must be filled out in full and returned with the tube. Follow shipping instructions carefully to insure safe arrival, since no credit can be allowed on broken tubes.

SHIPPING INSTRUCTIONS

1) Carefully wrap the tube in 1/4" thick cotton batting or other soft padding material.

2) Wrap the above in heavy kraft paper.

3) Pack in a rigid container which is at least 4 inches larger than the tube in each dimension.

4) Surround the tube with at least four inches of packed excelsior or similar shock absorbing material. Be certain that the packing is tight all around the tube.

5) Tubes returned from outside the continental United States should be packed in a wooden box.

Cv e.. .. . . onrrrMT «A„ ,„Av E>vnOE.ee 8) OPERATING CONDITIONS: (Please describe conditions prior to and at time of failure_

6) Ship prepaid preferably by AIR FREIGHTor RAILWAY EXPRESS. * -

We do not recommend parcel post or air parcel post shipment. _

SIGNATURE

HEWLETT-PACKARD CO. PAGE MILL ROAD. PALO ALTO. CALIF. U SA.

Figure 1-2. Cathode-Ray Tube Warranty

CATHODE RAY TUBE WARRANTY

Person to contact for further information:

COMPANY: _

ADDRESS:__

To process your claim quickly please enter the information indicated below:

1) ® INSTRUMENT MODEL_SERIAL_

2) TUBE TYPE_SERIAL_

3) ORIGINAL TUBE_REPLACEMENT TUBE_

4) YOUR PURCHASE ORDER NO__

5) DATE PURCHASED_

6) PURCHASED FROM___

7) COMPLAINT: (Please describe nature of trouble)_

instructions i. remove tilt stand, feet, and trim strip 2. attach filler strip and flanges keeping large notch on flanges to instrument bottom.

Figure 2-1. Rack Mounting Procedure tilt stand foot release button plastic foot tilt stand foot release button

plastic foot

0 0

Post a comment