2 Full Mirror Red2 Adjustment

a. Supply 100 % Yellow Signal and project on the screen.

b. Loosen 2 Screws (B) of the Full Mirror Red-2.

c. Insert a (-) screwdriver into Portion (b) and move the Full

Mirror Red-2 in the direction shown by the arrows so that color uniformity is achieved over the whole screen. And then tighten 2 screws (B).

Mirror Red-2 in the direction shown by the arrows so that color uniformity is achieved over the whole screen. And then tighten 2 screws (B).

Fig. 3-4-15
0 0

Post a comment