3 Full Mirror Bule Adjustment

a. Supply 100 % White Signal and project on the screen.

b. Loosen 2 Screws (C) of the Full Mirror Blue.

c. Insert a (-) screwdriver into Portion (c) and move the Full

Mirror Blue in the direction shown by the arrows so that color uniformity is achieved over the whole screen. And then tighten 2 screws (C).

Mirror Blue in the direction shown by the arrows so that color uniformity is achieved over the whole screen. And then tighten 2 screws (C).

Fig. 3-4-16

4. If the Full Mirror Blue adjustment can not be done, repeat step

1 through 2. Note:

Do not use excessive force when adjusting the Mirror. Otherwise, the Mirror may be damaged.

0 0

Post a comment