A0

• The surrounding temperature of the place of use may be too high.

• Clean the filter

• Relocate projector to a proper location.

• Place projector so that surrounding temperature is between 0 °C (32 °F) and 40 °C (104 °F) andthe humidity is between 10 % and 80 %(with no condensation).

L-n

Lampdoes not light up.

• There is the possibility that Lamp is burned-out.

• Wait until the Lamp Unit is cooled off (approx, 5 minutes) and try to turn the power back on.

• If this code appears, try above again and again.

• If this code appears continuously more than 5 or 6 times, replace the Lamp Unit.

• If this code appears again after replacement of the Lamp Unit, replace the Main Power PWB and Ballast PWB.

0 0

Post a comment