Lxp1010zuze

Dimensions

Mass

(Legs are not included)

Specifications

Note:

The attached card remote controller becomes necessary to adjust the following. Keep the card remote controller also together with the product to be repaired.

Optical mechanisms

Display Method

Optical System LCD panels

Projection lens

Lens axis shift

Keystone distortion correction

Screen size

Screen aspect ratio

Installation

Projector lamp

No. of colors

Brightness

Light output uniformity Contrast ratio Resolution

Electrical system PC-RGB input

Poly-silicon LCD panel x 3 units, Lens x 1, RGB shutter method, using Translucent TN liquid crystal panels Dichroic mirror separation, Dichroic prism composition Poly-silicon TFT(Thin Film Transistor) LCD panels x 3 (4:3 Aspect Ratio panels) Display method : Translucent TN liquid crystal panels Material : Poly-Silicon Panel size : 0.7" (diagonal)

Drive method : TFT(Thin Film Transistor) active matrix panel No. of pixels : 480,000(800 x 600) stripe pixels x 3 panels (1,440,000 pixels) Pixel Configuration : Stripe

Manual zoom/focus lens (1:1-1:1.3), F2.3-2.6, f=28mm-37mm

6:1 Low position (fixed)

30"-300" diagonal (aspect Ratio: 4:3)

4:3 (16:9 compatible)

desk, front/rear (menu selection)

AC 130 Watts UHM Lamp

16,777,216 colors (Full color)

700 lumen / ANSI

300:1

RGB 800 x 600 pixels, Video 500 TV lines

1pin : R/PR, 2pin:G/Y, 3pin:B/PB, 12pin : DDC data, 13pin:HD/SYNC, 14pin : VD,15pin:DDC clock (Jack also used for component video input.Signal type is selected on-screen.) Type : D-sub HD 15-pin x1 Input signal : Analog RGB standard input level

0.7(p-p)/75n terminated Dot clock frequency : 135MHz or less Scanning frequency : fH 24kHz-80kHz, fv 50Hz-86Hz HD/SYNC : TTL level, positive/negative(compatible) DV : TTL level, positive/negative(compatible)

S-video input

Composite video

Component video

Audio input

Serial port Others

Built-in speaker

Power supply Power consumption Usage temperature Usage humidity Storage temperature Storage humidity Card remote control unit

Display : S VIDEO IN Type : Mini Din 4-pin x1 Input signal :Y(luminance signal) 1.0V(p-p), sync negative, 75Q terminated C(chrominance signal) burst 0.286V(p-p), 75n terminated Scanning frequency : fH 15.75kHz, fV 60Hz

(NTSC/NTSC4.43/PAL-M) fH 15.63kHz, fV 50Hz (PAL/SECAM/PAL-N) input Display : VIDEO IN Type : RCA jack (yellow) x1 Input signal : 1.0V(p-p)/75n terminated Scanning frequency : Refer to S-video input Display : RGB/Y • Pb • Pr IN (Jack also used for composite video input. Signal type is selected on-screen.) Input signal : Y(luminance signal) 1.0V(p-p)/75Q terminated

Pb,Pr 0.7V(p-p)/75n terminated Scanning frequency : fH 15.75kHz, fV 60Hz (480i), fH 15.63kHz, fV 50Hz (625i), fH 31.5kHz, fV 60Hz (480p), fH 45kHz, fV 60Hz(720p), fH 33.75kHz, fV 60Hz (1080i)

Display : AUDIO IN

(Jack used for audio of PC-RGB input, S-video input and composite video input.) Type : L/R, M3 stereo mini jack x1 Input signal : 0.32V(rms) Display : RS-232C Type : Mini Din 8-pin x1

Size : 36mm round type Output power : 0.5 Watts, Mono 100V-240V AC, 50/60 Hz

210 Watts (standby mode* : 15 Watts) *with fan stopped.

20%-80% (no condensation)

-20°C-40°C (-4°F-104°F) , 40"C-60"C(104"F-140"F)

5%-85% Normal humidity(non-condensing)

Battery : Lithium battery (CR2025), DC3V

Range for operation : approximately 7m

Accessories

•Card remote control unit •Lithium battery (CR2025) •Power cord •Inst.book (Quick reference manual) •Inst.book (CD-ROM)

•VGA cable •Video cable •Audio cable •Swivel stand unit •Carrying bag

COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD.

No.PA014 Apr. 2001

Table of

Important safety precautions I

INSTRUCTION BOOK(CD-ROM)

1 SERVICE CAUTIONS AND NOTES

1.1. SERVICE POSITION 1

1.2. How to display Lamp operation time

(Service Mode) 2

1.3. How to initialize EEPROM IC 2

1.4. Lamp replacement procedure 3

1.5. Cleaning the Projection Lens 4

1.6. Connection of the Flexible Cables to Trap Connector 4

1.7. How to replace the lithium battery 4

2 DISASSEMBLY/ASSEMBLY PROCEDURES 5

2.1. DISASSEBLY FLOWCHART OF

0 0

Post a comment