Specification

TEST PATTERN SIGNAL LUMINANCE COLOR METER, CHROMA METER or CHROMA METER and DATA PROCESSOR

Refer to Description below

1. Supply 50 % White Pattern Signal (0.35 V [p-p]) and project on the screen.

2. Press ▲ or ▼ button on remote control to select "CUTOFF R" or "CUTOFF B".

3. Press 2 or ► button to adjust "CUTOFF R" or "CUTOFF B" so that color temperature (K) and its deviation (uv) at the center of screen are 9500 K ± 1000 K and 0.015 uv + 0.003 uv - 0.005 uv respectively by Luminance Color Meter, Chroma Meter or Chroma Meter and Data Processor.

Note:

After completing adjustments, press the "MENU" button to release from "LCD/FAN ADJUST" mode. (Adjustment data is memorized in EEPROM IC (IC2006) by pressing "MENU" button.) Otherwise, adjustment data 3.4.5. through 3.4.8. will be cancelled.

0 0

Post a comment