Link

SPECIFICATIONS

BLOCK DIAGRAMS

PRINTED WIRING BOARDS

SERVICE NOTE

FRAME SCHEMATIC DIAGRAM

REPAIR PARTS LIST

DISASSEMBLY

SCHEMATIC DIAGRAMS

• Precaution on Replacing the SY-185 Board

The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

Les composants identifiés par une marque 0 sont critiques pour la sécurité.

Ne les remplacer que par une pièce portant le numéro spécifié.

DIGITAL STILL CAMERA

2008A0500-1

DSC-H3_L2 © 2008.1 9-852-211-31 Sony EMCS Co. Published by Kohda TEC

SPECIFICATIONS

Camera [System]

Primary color filter Total pixel number of camera: Approx. 8 286 000 pixels Effective pixel number of camera:

Approx. 8 083 000 pixels Lens: Carl Zeiss Vario-Tessar 10 x zoom lens f = 6.3 - 63 mm (38 - 380 mm when converted to a 35 mm still camera) F3.5 - 4.4 Exposure control: Automatic exposure, Scene

Selection (9 modes) White balance: Automatic, Daylight, Cloudy,

Fluorescent 1,2,3, Incandescent, Flash File format (DCF compliant):

Still images: Exif Ver. 2.21 JPEG compliant, DPOF compatible

Movies: MPEG1 compliant (Monaural) Recording media: Internal Memory (approx.

31 MB), "Memory Stick Duo" Flash:Flash range (ISO sensitivity

(Recommended exposure Index) set to Auto): approx. 0.2 to 7.0 m (7 7/8 inches to 22 feet 11 5/8 inches) (W)/approx. 0.9 to 5.6 m (2 feet 11 1/2 inches to 18 feet 4 1/2 inches) (T)

[Input and Output connectors]

Multi connector: Video output

Audio output (Monaural) USB communication USB communication: Hi-Speed USB (USB 2.0 compliant)

[LCD screen]

LCD panel: 6.2 cm (2.5 type) TFT drive Total number of dots: 115 200 (480 x 240) dots

[Power, general]

Power: Rechargeable battery pack NP-BG1, 3.6 V

AC-LS5K AC Adaptor (not supplied), 4.2 V Power consumption (during shooting): 0.95 W Operating temperature: 0 to 40°C (32 to 104°F) Storage temperature: -20 to +60°C (-4 to +140°F) Dimensions: 106.0 x 68.5 x 47.5 mm (4 1/4 x 2 3/4 x 1 7/8 inches) (W/H/D, excluding protrusions) Mass: Approx. 380 g (13.4 oz) (including NP-BG1 battery pack, strap, adaptor ring, lens hood and lens cap, etc.) Microphone: Monaural Speaker: Monaural Exif Print: Compatible PRINT Image Matching III: Compatible PictBridge: Compatible

BC-CSG/BC-CSGB/BC-CSGC battery charger

Power requirements: AC 100 V to 240 V, 50/ 60 Hz, 2 W (BC-CSG/BC-CSGC)/ 2.6 W (BC-CSGB) Output voltage: DC 4.2 V, 0.25 A Operating temperature: 0 to 40°C (32 to 104°F) Storage temperature: -20 to +60°C (-4 to +140°F)

31/32 X 3 5/8 inches) (W/H/D) Mass: Approx. 75 g (2.7 oz)

Rechargeable battery pack NP-BG1

Used battery: Lithium-ion battery Maximum voltage: DC 4.2 V Nominal voltage: DC 3.6 V Capacity: 3.4Wh (960 mAh)

Design and specifications are subject to change without notice.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK A OR DOTTED LINE WITH MARK A ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer.

Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.

Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

Check the B+ voltage to see it is at the values specified. Flexible Circuit Board Repairing ' Keep the temperature of the soldering iron around 270°C during repairing. ' Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).

Be careful not to apply force on the conductor when soldering or unsoldering.

Unleaded solder

Boards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)

: LEAD FREE MARK

Unleaded solder has the following characteristics.

• Unleaded solder melts at a temperature about 40°C higher than ordinary solder.

Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350°C.

Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.

1. SERVICE NOTE ( ENGLISH | JAPANESE )

1-1. PRECAUTION ON REPLACING THE SY-185 BOARD

DESTINATION DATA

When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting. Refer to Service Manual ADJ, and perform "DESTINATION DATA WRITE".

USB SERIAL No.

The set is shipped with a unique ID (USB Serial No.) written in it.

This ID has not been written in a new board for service, and therefore it must be entered after the board replacement. Refer to Service Manual ADJ, and perform "USB SERIAL No. INPUT".

1-2. SELF-DIAGNOSIS FUNCTION

1-2-1. Self-diagnosis Function

When problems occur while the unit is operating, the self-diagnosis function starts working, and displays on the LCD screen what to do.

Details of the self-diagnosis functions are provided in the Instruction manual.

1-2-2. Self-diagnosis Display

When problems occur while the unit is operating, the LCD screen shows a 4-digit display consisting of an alphabet and numbers, which blinks at 3.2 Hz. This 5-character display indicates the "repaired by:", "block" in which the problem occurred, and "detailed code" of the problem.

LCD screen

LCD screen

C : Corrected by customer E : Corrected by service engineer

Indicates the appropriate Refer to "1-2-3. Self-diagnosis Code Table".

step to be taken.

13 Format the "Memory Stick Duo". 32 Turn on power again.

Self-diagnosis Code

Symptom/State

Correction

Repaired by:

Block Function

Detailed Code

C

1 3

0 1

The internal memory has experienced a format error.

Format the internal memory.

"Memory Stick Duo" is unformatted.

Format the "Memory Stick Duo".

"Memory Stick Duo" is broken.

Insert a new "Memory Stick Duo".

"Memory Stick Duo" type error

Insert a supported "Memory Stick Duo".

The camera cannot read or write data on the "Memory Stick Duo".

Turn the power off and on again, or taking out and inserting the "Memory Stick Duo" several times.

C

3 2

0 1

Trouble with hardware

Turn the power off and on again.

E

6 1

0 0

Difficult to adjust focus (Cannot initialize focus)

Retry turn the power on by the power switch. If it does not recover, check the focus reset sensor of lens block (pin @ of CN402 on the SY-185 board). If it is OK, check the focus motor drive IC (IC401 on the SY-185 board).

E

6 1

1 0

Zoom operations fault (Cannot initialize zoom lens.)

Retry turn the power on by the power switch. Check the zoom reset sensor of lens block (pin © of CN402 on the SY-185 board), if zooming is performed when the zoom button is operated. If it is OK, check the zoom motor drive IC (IC401 on the SY-185 board).

E

6 2

0 2

Abnormality of IC for steadyshot.

Check or replacement of the IC for steadyshot (IC501 on the SY-185 board).

E

6 2

1 0

Lens initializing failure.

Check or replacement of the IC for steadyshot (IC501 on the SY-185 board).

E

6 2

1 1

Lens overheating (PITCH).

Check the HALL element (PITCH) of optical image stabilizer (pin ©, ® of CN401 on the SY-185 board). If it is OK, check PITCH/YAW angular velocity sensor (SE501 on the SY-185 board) peripheral circuits.

E

6 2

1 2

Lens overheating (YAW).

Check the HALL element (YAW) of optical image stabilizer (pin ©, ® of CN401 on the SY-185 board). If it is OK, check PITCH/YAW angular velocity sensor (SE501 on the SY-185 board) peripheral circuits.

E

6 2

2 0

Abnormality of thermistor.

Replacement of lens block.

E

9 1

0 1

Abnormality when flash is being charged.

Checking of flash unit or replacement of flash unit. (Note)

E

9 2

0 0

Non-standard battery is used.

Use the compatible battery only.

Note: After repair, be sure to perform "1-3. PROCESS AFTER FIXING FLASH ERROR".

Note: After repair, be sure to perform "1-3. PROCESS AFTER FIXING FLASH ERROR".

1-3. PROCESS AFTER FIXING FLASH ERROR

When "FLASH error" (Self-diagnosis Code E : 91 : 01) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed automatically to disabling charge and flash setting.

After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the HOME screen.

Method for Initializing the Flash Error Code

Initialize

Initializes the setting to the default setting. Even if you execute this function, the images stored in the internal memory are retained.

1 Select [Initialize] with V/V/b/B on the control button, then press Z. The message "Initialize all settings" appears.

The settings are reset to the default setting.

To cancel initializing

• Be sure not to power off the camera while initializing.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment